CASCADE'S ALL STAINLESS STEEL PERMANENT REPAIR CLAMPS

   
 

Fast-action Cascade™ repair clamps eliminate the need for costly pipe replacement and repairs. Simply open the clamp, wrap it around the leak, engage locking washer plate and tighten.
All gaskets fitted to Cascade's repair clamps are custom-sized to fit the specific ranges of pipe diameters, eliminating the need for joining gaskets.
Produced in a gridded design with tapered ends to ensure optimum sealing efficiency, all gaskets have armour plates that are vulcanised into the rubber at the moulding stage - they fit perfectly and cannot be dislodged.

 
 

Full Circle, Single Band Repair Clamps (CR1)

Suitable for pipes from 2" through to 12", Cascade CR1-type repair clamps can be supplied in various lengths to suit your needs. The armour plate's span allows you an outside diameter operating range of up  to lOmm.
A standard range is always available and we can manufacture clamps to fit non-standard pipe OD's at very short notice.

Refer to CLAMP SIZES page

Full Clamps

 

Full Clamps

Full Circle, Double-Band repair Clamps (CR2)

Cascade CR2-type repair clamps offer you double the flexibility in operating OD ranges, and are capable of withstanding higher pressures.
Double Band repair clamps are available on request and can be despatched at short notice.

Refer to CLAMP SIZES page

Full Circle Multi-band Repair Clamps (CR3 or more)

Cascade multi-band repair clamps are made up on request to suit your specific requirements. Used mainly on larger diameter pipes, they offer the greatest flexibility in operating OD ranges.

Refer to CLAMP SIZES page

Full Clamps
Tapped Clamps

Tapped Repair Clamps (CTR)

Manufactured on request, Single, Double and Multi-band tapped repair clamps provide the same quick-and-easy Cascade fitting qualities. They are extremely useful for repairing broken and damaged pipe at service connections or branch lines, restoring the connection at the same time. Also efficient in cases where pipes are prone to circumferential cracking, as they provide full circumference sealing.

Refer to CLAMP SIZES page

Flanged Offtakes (CFO)

Made in Single, Double and Multi-band options to suit customers' requirements. Flanged offtakes provide a full circumference seal around the pipe, while at the same time providing a reinforcing effect to the pipe. Flanged offtakes are manufactured on request and customers need to specify pipe OD, diameter of offtake and flange specification.

Refer to CLAMP SIZES page

Flanged Offtakes
Service Saddles

Service Saddles (CSS)

The flexible stainless steel band allows for easy filling while wrapping fully around the pipe, providing support and stability - eliminating the "crushing effect" of more rigid products. The band is recessed to correctly position the "O" ring gasket and provide maximum sealing.
Recommended for PVC pipe and manufactured to suit pipe sizes up to 12", Cascade service saddles can be fitted with 1/2" through to 2" diameter sockets.

Refer to CLAMP SIZES page

Fast/Half Clamps (Code CFC)

Used for repairing pin-hole breaks in smaller diameter pipes, they provide a quick, easy and cost-effective solution for this type of break. Cascade fast/half clamps are available in sizes to suit galvanised pipe from 1/2 " to 8 ".
To install a Cascade fast/half clamp, simply unhitch the bolt-head, spread lugs open, snap into position over the leak and tighten - your leak-repair is complete
Standard lengths always in stock are 75mm and 150mm.

Refer to CLAMP SIZES page

Half Clamps
Junior Couplings

Junior Couplings (Code CFW)

Cascade junior couplings provide a quick, easy and cost-effective solution for repairing larger breaks in smaller diameter pipes, by providing a full circumference seal around the pipe. Available in sizes to suit galvanised and
copper pipe from 1/2" to 11/2".
To install: Unhitch bolt-head, slide gasket out and wrap around leak. Spread lugs open, snap into position over the gasket, tighten- making sure that the armour plate's centering nipples are positioned between the clamp's ends -and your repair is complete.
Standard lengths always in stock are 75mm and 150mm.

Refer to CLAMP SIZES page

 

 

 

CFC and CFW Ranges - General Material Specifications:

  • Clamp Band - T304 or T316 Stainless Steel
  • Lugs - Ductile iron, allover dichromate
  • Carbon steel nuts, bolts and washers - zinc yellow plated
  • CFC gasket - natural rubber (Buna N available on request) with gridded design for maximum sealing effect.
  • CFW gasket - Buna N with gridded design and vulcanised armour for maximum sealing effect
 
Download a Brochure in PDF format for your convenience.


If you require Acrobat Reader download from Adobe  Download Adobe Acrobat Reader  Click on the Adobe Icon to install Acrobat Reader
   
 

Cascade Sales & Distribution
47 Illana Street Delville Ext 4, Germiston, 1401
Republic of South Africa.
Tel: +27 (11) 824-3943
Fax: +27 (11) 827-0556
Cell: +27 82 511 9352
Hotline: 0861CASCADE
E-mail: info@cascade.co.za

P.O. Box 9184, Elsburg, 1407
Republic of South Africa

Cascade Head Office
Cascade House
183 Elsburg Road Delville Ext 4, Germiston, 1401
Republic of South Africa.
Tel: +27 (11) 827-1225
Fax: +27 (11) 827-1344
Cell: +27
E-mail: info@cascade.co.za

P.O. Box 9184, Elsburg, 1407
Republic of South Africa

 

 

 

   
 
Cascade 2005 - 2015 Maintained & Hosted by Afrisys